aligned with the rubber plate composite deck
based on the line: in the room center, the center line, the ground is divided into four sections, from the middle to both sides of paving, each PVC must be firmly around the edge, and the corresponding weak copper foil baseline (conductivity). 3, weak end after baseline, the construction ground completely clean up and began to put the copper foil, size 2 x 2 meters after the glue, glue to form a mesh uniform,
if the drying time is 30 minutes, until the sticky paste before the PVC board (conductivity). 4, shop PVC board, check the floor intact, in the process of handling the floor of the small cart, and should be handled with care, not thrown, avoid damage to the PVC board, thereby affecting the quality of the product.
the shop is stuck, should pay attention to the size of the PVC panels and paving the way to avoid PVC in a post, the PVC should be aligned with the rubber plate is bonded, tube will be flat on the ground in PVC paste, the paste should be an accurate positioning, and to exclude the floor and other basic air into real play dense bonding with a rubber hammer with naughty pressure rolling, and paving direction according to the order of the PVC board. 6. The PVC board should be tightly pressed and pressed.
Decking Boards For Sale, Low maintenance Composite Decking Boards
floating outdoor deck floor
composite fascia board price
wood plastic synthetic boards manufacturing